Stainless Steel Welded Pipe for Oil and Gas
STAINLESS STEEL WELDED PIPE
Stainless Steel Welded Pipe for Oil and Gas
Shiwang Pipe supplies stainless steel welded pipe for upstream and midstream oil and gas service where corrosion resistance and weld integrity are critical. Austenitic and duplex grades such as 316L, 2205 and 2507 resist sour service containing H2S and CO2, chlorides and CO2-induced corrosion, extending service life in flowlines, gathering systems and processing facilities. Pipes are longitudinally welded with controlled heat input, fully solution annealed and supplied with documented weld procedure and mechanical testing for reliable performance in demanding field conditions.
Request a Quote
SPECIFICATIONS & QUALITY
Qualified for Corrosive Oil & Gas Service
Oil and gas welded pipes are produced to ASTM A312/A358, ASTM A790 for duplex, NACE MR0175/ISO 15156 where sour service is specified, and corresponding EN and GB standards. Welds are 100 percent inspected by radiographic or ultrasonic testing, with hydrostatic testing, intergranular corrosion tests and elevated or low-temperature impact testing as required. EN 10204 3.1 certification and independent inspection (SGS, BV, TUV) are available. Applications include offshore platforms, gas gathering and flowlines, process piping, separators and heat exchangers.
Which grades suit sour and chloride service?
316L is standard for general corrosive service, while 2205 and 2507 duplex offer higher strength and chloride resistance for H2S and CO2 environments. NACE MR0175/ISO 15156 compliance can be provided for sour service.
What mechanical and corrosion tests are included?
Welds receive 100 percent radiographic or ultrasonic inspection and hydrostatic testing. Intergranular corrosion tests (ASTM A262), hardness, flattening and flaring tests, and low or high-temperature impact tests are available to project specification.
What sizes and documentation are available?
Outer diameters from 21.3 mm to 3000 mm and wall thickness from 2 mm to 80 mm, in fixed lengths up to 12 m. Each pipe is supplied with an EN 10204 3.1 certificate, WPS/PQR records, mechanical and corrosion test reports and full export documentation.
Contact Us

Specifications at a Glance
| Material / Grade | 304/304L, 316/316L, 321, 310S, 2205 duplex; special alloys such as 904L, Hastelloy, Inconel and titanium on request |
|---|---|
| Standard | ASTM A312, A358, A778, A928; EN 10217-7; GB/T 12771; JIS G3468 |
| Size range | Per order – specify required outer diameter, wall thickness and length; see the product description above or ask for our current range |
| Surface finish | Mill, pickled, brushed or polished |
| End finish | Plain, beveled or grooved; flanges on request |
| Inspection | 100% RT or UT weld inspection, hydrostatic test, dimensional and visual check; third-party inspection available |
| Certificate | EN 10204 3.1 MTC with chemical and mechanical test reports; export documentation included |
Grade Equivalent Comparison
| ASTM / AISI | UNS | EN | JIS | Typical Use |
|---|---|---|---|---|
| 304 | S30400 | 1.4301 | SUS304 | General food, chemical and architectural service |
| 304L | S30403 | 1.4306 | SUS304L | Welded construction, intergranular corrosion resistance |
| 316 | S31600 | 1.4401 | SUS316 | Corrosion-resistant and marine service |
| 316L | S31603 | 1.4404 | SUS316L | Low-carbon welded structures |
| 321 | S32100 | 1.4541 | SUS321 | High-temperature stabilized service |
| 310S | S31008 | 1.4845 | SUS310S | Heat-resistant high-temperature service |
| 2205 | S31803 / S32205 | 1.4462 | SUS329J3L | Duplex, high strength and corrosion resistance |
