Small-Diameter Carbon Steel Welded Pipe
CARBON STEEL WELDED PIPE
Small-Diameter Carbon Steel Welded Pipe
Shiwang Pipe supplies small-diameter carbon steel welded pipe produced by high-frequency electric-resistance welding (ERW) for fluid conveyance, mechanical and structural applications. The ERW process delivers a tight, uniform weld with close dimensional tolerance, a smooth surface and clean cut ends, making these pipes economical and easy to thread, bend and galvanize. Common grades are Q195 and Q235B (ASTM A53 Grades A/B, S235JR). Small diameters suit low-pressure water and gas lines, conduit, furniture, greenhouses, fencing and general mechanical fabrication.
Request a Quote
SPECIFICATIONS & QUALITY
High-Frequency ERW Welding for Everyday Service
Small-diameter ERW carbon steel pipes are produced to ASTM A53, ASTM A500, GB/T 3091, EN 10255 and EN 10219, with plain ends, threaded and coupled ends, or galvanized finish. The weld is inspected by eddy current or ultrasonic testing, and pipes undergo hydrostatic pressure testing, flattening and flaring tests and dimensional checks. Black, galvanized, varnished or oiled surfaces are available. Mill test certificates and third-party inspection (SGS, BV, TUV) can be provided. Applications include low-pressure water and gas distribution, fire protection, electrical conduit, scaffolding, furniture and agricultural structures.
What grades and manufacturing process are used?
Pipes are made from Q195 and Q235B coil (equivalent to ASTM A53 Grades A/B and S235JR) using high-frequency ERW welding, which gives a uniform weld, tight dimensions and a smooth surface suitable for threading and galvanizing.
Can pipes be threaded, galvanized or supplied in fixed lengths?
Yes. Plain or threaded and coupled ends are available, with hot-dip galvanizing to ASTM A123, black varnish or anti-rust oil. Fixed lengths of 5.8 m or 6 m and custom cut lengths are standard, with bundled export packaging.
What pressure tests and certificates are provided?
Welds are checked by eddy current or ultrasonic testing, and pipes undergo hydrostatic pressure, flattening and flaring tests to ASTM A53, GB/T 3091 and EN 10255, with EN 10204 3.1 mill test certificates.
Contact Us

