Large Diameter Thin Wall Carbon Steel Welded Pipe

Large-Diameter Thin-Wall Carbon Steel Welded Pipe

Carbon steel welded pipes stacked for pipeline construction CARBON STEEL WELDED PIPE

Large-Diameter Thin-Wall Carbon Steel Welded Pipe

Shiwang Pipe manufactures large-diameter thin-wall carbon steel welded pipe for projects requiring high flow capacity and an economical, lightweight section. Roll-formed and joined by longitudinal submerged-arc (LSAW) or electric-resistance (ERW) welding, then sized and straightened, thin-wall sections maintain roundness and straightness while keeping material and handling costs down. Common grades are Q235B and Q355B (ASTM A53/A500, S235/S355). These pipes are widely used for low-pressure water, drainage and ventilation, casing, piling, steel structures and large-diameter conveyance where heavy walls are not required.
Request a Quote

SPECIFICATIONS & QUALITY

Cost-Effective Large Diameters, Dimensionally Stable

Large-diameter thin-wall carbon steel pipes are produced to ASTM A53/A500, ASTM A252 for piling, GB/T 3091, GB/T 9711 and EN 10219 as applicable. Welds are inspected by ultrasonic or radiographic testing, with hydrostatic testing, dimensional checks and careful control of roundness and edge preparation. Pipes are supplied with anti-rust coating, beveled or plain ends, and can be externally coated or lined on request. EN 10204 3.1/3.2 certificates and third-party inspection are available. Applications include drainage and irrigation mains, ventilation and dust ducts, casing, piling, temporary works and structural columns.

What welding process and grades are used for large thin-wall pipes?
Longitudinal submerged-arc (LSAW) or high-frequency ERW welding is used depending on diameter and thickness, in grades Q235B/Q355B equivalent to ASTM A53/A500 and S235/S355. Sizing and straightening control roundness in thin sections.

What coatings and end preparations are available?
Anti-rust oil, black varnish, painting or hot-dip galvanizing, and external 3PE/epoxy coating or internal lining can be supplied. Plain or bevelled ends, end caps and export bundling are provided.

What standards and testing are provided?
Produced to ASTM A53/A500/A252, GB/T 3091/9711 and EN 10219. Welds receive ultrasonic or radiographic inspection, hydrostatic testing and dimensional checks, with EN 10204 3.1/3.2 mill test certificates and SGS/BV/TUV inspection.

Contact Us

Large diameter steel pipes stacked under the gantry crane in the factory yard