Large Diameter Thin Wall Stainless Steel Welded Pipe

Large-Diameter Thin-Wall Stainless Steel Welded Pipe

Stainless steel welded pipes for oil, gas and industrial service STAINLESS STEEL WELDED PIPE

Large-Diameter Thin-Wall Stainless Steel Welded Pipe

Shiwang Pipe manufactures large-diameter thin-wall stainless steel welded pipe where light weight, large flow area and corrosion resistance are priorities. Roll-formed and longitudinally welded with controlled heat input, thin-wall sections are sized and straightened to hold roundness and straightness without distortion. Grades 304/304L and 316/316L are standard, with 321 and duplex on request. Outer diameters range from approximately 219 mm to 3000 mm with comparatively light walls, suitable for low-pressure, ventilation, drainage and large-flow conveyance.
Request a Quote

SPECIFICATIONS & QUALITY

Controlled Roundness in Thin-Wall Sections

Large-diameter thin-wall pipes are produced to ASTM A312/A778, EN 10217-7 and GB/T 12771 and supplied in the annealed, pickled condition. Welds are inspected by radiographic, ultrasonic or penetrant testing, followed by hydrostatic or pneumatic testing where specified, and careful checks of roundness, straightness and diameter tolerance. Edge preparation and handling are controlled to avoid thin-wall deformation during transport and installation. EN 10204 3.1 certification and third-party inspection are available. Applications include stacks and flue ducts, ventilation and exhaust systems, low-pressure water and drainage mains, and large-flow process piping.

What diameter and wall-thickness ranges are available?
Outer diameters from approximately 219 mm to 3000 mm with light wall thicknesses, produced in grades 304/304L, 316/316L and 321. Confirm the exact thin-wall range and out-of-round tolerance for the diameter and application.

How do you prevent thin-wall deformation?
Pipes are sized and straightened after welding to control roundness and straightness, with careful handling, edge preparation and bracing during transport and installation. Diameter and out-of-round tolerances are checked before shipment.

What testing and certificates are provided?
Welds are inspected by radiographic, ultrasonic or penetrant testing, with hydrostatic or pneumatic testing and dimensional checks as required. Manufactured to ASTM A312/A778, EN 10217-7 and GB/T 12771, with EN 10204 3.1 certification.

Contact Us

Large-diameter thick-wall stainless steel welded pipes on workshop racks

Specifications at a Glance

Material / Grade304/304L, 316/316L, 321, 310S, 2205 duplex; special alloys such as 904L, Hastelloy, Inconel and titanium on request
StandardASTM A312, A358, A778, A928; EN 10217-7; GB/T 12771; JIS G3468
Size rangePer order – specify required outer diameter, wall thickness and length; see the product description above or ask for our current range
Surface finishMill, pickled, brushed or polished
End finishPlain, beveled or grooved; flanges on request
Inspection100% RT or UT weld inspection, hydrostatic test, dimensional and visual check; third-party inspection available
CertificateEN 10204 3.1 MTC with chemical and mechanical test reports; export documentation included

Grade Equivalent Comparison

ASTM / AISIUNSENJISTypical Use
304S304001.4301SUS304General food, chemical and architectural service
304LS304031.4306SUS304LWelded construction, intergranular corrosion resistance
316S316001.4401SUS316Corrosion-resistant and marine service
316LS316031.4404SUS316LLow-carbon welded structures
321S321001.4541SUS321High-temperature stabilized service
310SS310081.4845SUS310SHeat-resistant high-temperature service
2205S31803 / S322051.4462SUS329J3LDuplex, high strength and corrosion resistance