Special-Shaped Stainless Steel Welded Tube
STAINLESS STEEL WELDED TUBE
Special-Shaped Stainless Steel Welded Tube
Shiwang Pipe manufactures square rectangular stainless steel welded tube and other special-shaped sections in non-round profiles, including oval, D-shaped, triangular and custom profiles. Produced by roll-forming and precision longitudinal welding followed by section sizing, these tubes achieve accurate corner geometry, straightness and consistent wall thickness. Grades 304/304L and 316/316L are standard, with 321 and other grades on request. Sections range from small precision tubes up to large structural box sections, supplied in mill, pickled or polished finishes for frameworks, machinery, architecture and specialized equipment.
Request a Quote
SPECIFICATIONS & QUALITY
Precision-Formed Custom Sections to Drawing
Special-shaped tubes are produced to ASTM A500/A554, EN 10217-7, EN 10219, GB/T 12771 and GB/T 3094-type section standards, or to customer drawings and cross-sectional specifications. Welds are inspected by eddy current, radiographic or ultrasonic testing, and sections are checked for dimensional accuracy, corner radius, twist and straightness. Custom tooling can be developed for proprietary profiles. EN 10204 3.1 certification and third-party inspection are available. Applications include machinery frames, structural and architectural members, handrails, conveyors, heat exchangers and equipment housings.
What section shapes and sizes can you produce?
Square, rectangular, oval, D-shaped, triangular and other custom profiles are available, from small precision tubes to large structural box sections. Provide a cross-section drawing and tolerances and we will confirm feasibility and tooling.
How are dimensional accuracy and corner quality controlled?
Sections are sized after welding for accurate cross-section, corner radius and straightness, and inspected for twist, squareness and wall thickness. Welds receive eddy current, radiographic or ultrasonic testing to the specified standard.
Which grades and finishes are available?
304/304L and 316/316L are standard, with 321 and other alloys on request. Mill, pickled, brushed or polished finishes and custom cutting, punching and drilling are available, with EN 10204 3.1 certification.
Contact Us

Specifications at a Glance
| Material / Grade | 304/304L, 316/316L, 321, 310S, 2205 duplex; special alloys such as 904L, Hastelloy, Inconel and titanium on request |
|---|---|
| Standard | ASTM A312, A358, A778, A928; EN 10217-7; GB/T 12771; JIS G3468 |
| Size range | Per order – specify required outer diameter, wall thickness and length; see the product description above or ask for our current range |
| Surface finish | Mill, pickled, brushed or polished |
| End finish | Plain, beveled or grooved; flanges on request |
| Inspection | 100% RT or UT weld inspection, hydrostatic test, dimensional and visual check; third-party inspection available |
| Certificate | EN 10204 3.1 MTC with chemical and mechanical test reports; export documentation included |
Grade Equivalent Comparison
| ASTM / AISI | UNS | EN | JIS | Typical Use |
|---|---|---|---|---|
| 304 | S30400 | 1.4301 | SUS304 | General food, chemical and architectural service |
| 304L | S30403 | 1.4306 | SUS304L | Welded construction, intergranular corrosion resistance |
| 316 | S31600 | 1.4401 | SUS316 | Corrosion-resistant and marine service |
| 316L | S31603 | 1.4404 | SUS316L | Low-carbon welded structures |
| 321 | S32100 | 1.4541 | SUS321 | High-temperature stabilized service |
| 310S | S31008 | 1.4845 | SUS310S | Heat-resistant high-temperature service |
| 2205 | S31803 / S32205 | 1.4462 | SUS329J3L | Duplex, high strength and corrosion resistance |
