When buyers source stainless steel pipe, the standard written on the purchase order matters as much as the grade. A312, A358, A790 and EN 10217-7 are not interchangeable—each defines a manufacturing route, product form, and inspection regime. Specify the wrong one and you may receive seamless pipe where welded was intended, or a material certificate that does not meet your project acceptance.
ASTM A312 — Seamless and Welded Austenitic Stainless Pipe
A312 covers seamless, straight-welded, and heavily cold-worked austenitic stainless steel pipe for high-temperature and general corrosive service. It is the most widely specified standard for small-to-medium diameter process pipe.
- Common grades: TP304/304L, TP316/316L, TP321, TP347, TP310S
- Process: seamless for small diameters; welded available for larger sizes
- Typical use: food and pharmaceutical, chemical, boiler, heat exchanger
ASTM A358 — Electric-Fusion-Welded Austenitic Pipe (High-Temperature Service)
A358 covers electric-fusion-welded (EFW) austenitic stainless pipe for high-temperature service. It is the standard of choice for large-diameter welded runs in petrochemical and utility piping. Radiographic examination of the weld is required under certain options.
- Common grades: same austenitic family as A312 (304H, 316H, 321H, 347H)
- Process: welded, typically large diameter (16" and above)
- Typical use: refinery, reformer, exhaust, seawater-cooled service
ASTM A790 / A928 — Duplex and Super Duplex Pipe
A790 covers seamless and welded ferritic/austenitic (duplex) pipe; A928 is the welded counterpart with required filler metal addition. Both target chloride and seawater service where standard 304/316L suffers stress-corrosion cracking.
- Common grades: S31803 (2205), S32750 (2507), S32760
- Process: seamless (A790) or welded with filler (A928)
- Typical use: offshore, desalination, chemical tankers, chloride piping
EN 10217-7 — European Welded Stainless Tube for Pressure
EN 10217-7 specifies welded stainless steel tubes for pressure purposes under the EU Pressure Equipment Directive (PED). It is the default standard for European and CE-marked projects.
- Common grades: 1.4301 (304), 1.4404 (316L), 1.4571 (316Ti)
- Documentation: EN 10204 3.1 mill test certificate
- Typical use: EU pressure systems, HVAC, food equipment
GB/T 12771 — Chinese Welded Austenitic Stainless Pipe
GB/T 12771 is the Chinese national standard for welded austenitic stainless steel pipe. It is the reference for domestic Chinese projects and is broadly harmonized with international practice on dimensional tolerance.
Side-by-Side Comparison
| Standard | Process | Grades | Weld Inspection | Typical Application |
|---|---|---|---|---|
| A312 | Seamless / welded | 304/L, 316/L, 321, 347, 310S | Hydro + eddy current | Process pipe, boiler |
| A358 | EFW welded | 304H, 316H, 321H, 347H | Radiographic (optional B) | Refinery, high-temp |
| A790 | Seamless / welded | 2205, 2507 | Hydro + UT/RT | Offshore, seawater |
| A928 | Welded, with filler | 2205, 2507, 254SMO | Weld RT | Large-line chloride service |
| EN 10217-7 | Welded | 1.4301, 1.4404, 1.4571 | Per EN 10204 3.1 | EU PED projects |
| GB/T 12771 | Welded | 06Cr19Ni10, 022Cr17Ni12Mo2 | Hydro | Domestic Chinese projects |
How to Choose
- Small bore, high pressure / high temperature: A312 seamless
- Large-diameter welded runs in petrochemical: A358
- Seawater, chloride, offshore: A790 / A928 duplex
- European CE / PED project: EN 10217-7
- Domestic Chinese project: GB/T 12771
Frequently Asked Questions
Q: What is the practical difference between A312 and A358?
A: A312 covers seamless (and some welded) pipe; A358 is exclusively electric-fusion-welded for high-temperature service and requires radiographic weld examination under option B. For large-diameter runs (>12") A358 welded is both more economical and the project-spec default.
Q: Can you supply both seamless and welded pipe?
A: We manufacture large-diameter welded stainless, duplex and alloy pipe in-house. Seamless items are sourced from qualified sister mills and shipped with full EN 10204 3.1 certification.
Q: What certificate ships with the pipe?
A: EN 10204 3.1 mill test certificate covering chemical composition, mechanical properties, dimensional inspection, hydrostatic test and (where specified) weld NDE results.
Need a quote to a specific standard?
Send us your OD, wall thickness, grade and standard (e.g. A358 TP316L, 24" Sch10) and we will reply with mill test options and lead time. Request a quote →
